Un conseil? Une demande de devis?  01 60 43 26 65
* pour les collectivités
et les mairies
Technimusic - Matériel de sonorisation et d'éclairage
Un conseil? Une demande de devis?  01 60 43 26 65
Vous êtes ici : Technimusic > Sono > > > Sono portable avec 2 micros > LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
Retour au rayon
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
LD Systems
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
Vidéo de présentation
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
> >
< <

LD Systems ROADBUDDY 10 HBH 2 - Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset

Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset
LD Systems

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

 825,00 €
Moyens de paiement sur notre site
Moyens de paiement sur notre site :
*
Garantie
3 ans
Un conseil? Une demande de devis? 01 60 43 26 65
Caractéristiques techniques
Type de produitHaut-parleurs sur piles
Diamètre boomer/médium10 "
Diamètre Boomer254 mm
Aimant boomerFerrite
Marque boomerSur mesure
Diamètre tweeter1 "
Diamètre Tweeter25,4 mm
Aimant tweeterFerrite
Marque tweeterSur mesure
AmplificateurClasse D
Puissance (efficace)120 W
Puissance (crête)480 W
Réponse en fréquence55 - 18000 Hz
Niveau de pression sonore (pour 1 W à 1 m)96 dB
Niveau de pression sonore maximal115 dB
Circuits de protectionCourt-circuit, surcharge, Surtension
RéglagesCD / Tape IN Level, Echo, Graves, High, Mic 1 Level, Mic 2 Level, sélecteur AUX / MP3, Volume général
IndicateursIndicateur de charge / batterie, Power

Lecteur de médias

Médias reconnusBluetooth, Carte SD, Clé USB
Formats reconnusCD avec fichiers WAV, Fichiers MP3, Fichiers WMA
Contrôles lecteur médiasÉgaliseur, Mode (Menu / Bluetooth /SD / USB), Plage précédente, Plage suivante, Play / Pause, Repeat, Stop
Indicateurs lecteur médiasÉcran LCD multifonctions rétro-éclairé
Entrées ligne1
Connecteurs d'entrée ligne2 x Cinch (RCA), 2 x XLR, Jack 6,35 mm, Mini-Jack 3,5 mm
Entrées micro2, 2 x XLR, Jack 6,35 mm

Récepteur HF

Gamme de fréquences HF863 - 865 MHz
Type de modulationFM
Canaux16
Réponse en Fréquence récepteur HF50 - 17000 Hz
Contrôles récepteur HFASC (scan automatique), Niveau de Mute (Squelch), Power / Volume, Value Down, Value Up
Indicateurs récepteur HFécran LED, indicateur audio (LED), RF (LED)
Connecteurs récepteur HFnTNC pour antenne récepteur
Puissance d'Émission HF10 mW
Poids du Micro/Émetteur à main0,285 kg
Matériau du Micro/Émetteur à mainAluminium
Poids d'émetteur ceinture0,08 kg
Matériau d'émetteur ceintureplastique ABS
Tension secteurBloc secteur, 100 V - 120 V / 60 Hz, 220 V - 240 V AC / 50 Hz
Batteries rechargeables12 V / 5 Ah
Matériau coffretPolypropylène
Finition coffretBass Reflex
Largeur415 mm
Hauteur (mm)525 mm
Profondeur328 mm
Poids16,5 kg
Autres propriétésEmbase pour pied, diamètre 36 mm, Infrarouge pour lecteur de médias, poignée de transport, Poignée télescopique, Roulettes de transport
Présentation
Mode d'emploi ROADBUDDY 10 HBH 2
En savoir plus

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Type de produitHaut-parleurs sur piles
Diamètre boomer/médium10 "
Diamètre Boomer254 mm
Aimant boomerFerrite
Marque boomerSur mesure
Diamètre tweeter1 "
Diamètre Tweeter25,4 mm
Aimant tweeterFerrite
Marque tweeterSur mesure
AmplificateurClasse D
Puissance (efficace)120 W
Puissance (crête)480 W
Réponse en fréquence55 - 18000 Hz
Niveau de pression sonore (pour 1 W à 1 m)96 dB
Niveau de pression sonore maximal115 dB
Circuits de protectionCourt-circuit, surcharge, Surtension
RéglagesCD / Tape IN Level, Echo, Graves, High, Mic 1 Level, Mic 2 Level, sélecteur AUX / MP3, Volume général
IndicateursIndicateur de charge / batterie, Power

Lecteur de médias

Médias reconnusBluetooth, Carte SD, Clé USB
Formats reconnusCD avec fichiers WAV, Fichiers MP3, Fichiers WMA
Contrôles lecteur médiasÉgaliseur, Mode (Menu / Bluetooth /SD / USB), Plage précédente, Plage suivante, Play / Pause, Repeat, Stop
Indicateurs lecteur médiasÉcran LCD multifonctions rétro-éclairé
Entrées ligne1
Connecteurs d'entrée ligne2 x Cinch (RCA), 2 x XLR, Jack 6,35 mm, Mini-Jack 3,5 mm
Entrées micro2, 2 x XLR, Jack 6,35 mm

Récepteur HF

Gamme de fréquences HF863 - 865 MHz
Type de modulationFM
Canaux16
Réponse en Fréquence récepteur HF50 - 17000 Hz
Contrôles récepteur HFASC (scan automatique), Niveau de Mute (Squelch), Power / Volume, Value Down, Value Up
Indicateurs récepteur HFécran LED, indicateur audio (LED), RF (LED)
Connecteurs récepteur HFnTNC pour antenne récepteur
Puissance d'Émission HF10 mW
Poids du Micro/Émetteur à main0,285 kg
Matériau du Micro/Émetteur à mainAluminium
Poids d'émetteur ceinture0,08 kg
Matériau d'émetteur ceintureplastique ABS
Tension secteurBloc secteur, 100 V - 120 V / 60 Hz, 220 V - 240 V AC / 50 Hz
Batteries rechargeables12 V / 5 Ah
Matériau coffretPolypropylène
Finition coffretBass Reflex
Largeur415 mm
Hauteur (mm)525 mm
Profondeur328 mm
Poids16,5 kg
Autres propriétésEmbase pour pied, diamètre 36 mm, Infrarouge pour lecteur de médias, poignée de transport, Poignée télescopique, Roulettes de transport
Mode d'emploi ROADBUDDY 10 HBH 2
Description complète

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Caractéristiques techniques
Type de produitHaut-parleurs sur piles
Diamètre boomer/médium10 "
Diamètre Boomer254 mm
Aimant boomerFerrite
Marque boomerSur mesure
Diamètre tweeter1 "
Diamètre Tweeter25,4 mm
Aimant tweeterFerrite
Marque tweeterSur mesure
AmplificateurClasse D
Puissance (efficace)120 W
Puissance (crête)480 W
Réponse en fréquence55 - 18000 Hz
Niveau de pression sonore (pour 1 W à 1 m)96 dB
Niveau de pression sonore maximal115 dB
Circuits de protectionCourt-circuit, surcharge, Surtension
RéglagesCD / Tape IN Level, Echo, Graves, High, Mic 1 Level, Mic 2 Level, sélecteur AUX / MP3, Volume général
IndicateursIndicateur de charge / batterie, Power

Lecteur de médias

Médias reconnusBluetooth, Carte SD, Clé USB
Formats reconnusCD avec fichiers WAV, Fichiers MP3, Fichiers WMA
Contrôles lecteur médiasÉgaliseur, Mode (Menu / Bluetooth /SD / USB), Plage précédente, Plage suivante, Play / Pause, Repeat, Stop
Indicateurs lecteur médiasÉcran LCD multifonctions rétro-éclairé
Entrées ligne1
Connecteurs d'entrée ligne2 x Cinch (RCA), 2 x XLR, Jack 6,35 mm, Mini-Jack 3,5 mm
Entrées micro2, 2 x XLR, Jack 6,35 mm

Récepteur HF

Gamme de fréquences HF863 - 865 MHz
Type de modulationFM
Canaux16
Réponse en Fréquence récepteur HF50 - 17000 Hz
Contrôles récepteur HFASC (scan automatique), Niveau de Mute (Squelch), Power / Volume, Value Down, Value Up
Indicateurs récepteur HFécran LED, indicateur audio (LED), RF (LED)
Connecteurs récepteur HFnTNC pour antenne récepteur
Puissance d'Émission HF10 mW
Poids du Micro/Émetteur à main0,285 kg
Matériau du Micro/Émetteur à mainAluminium
Poids d'émetteur ceinture0,08 kg
Matériau d'émetteur ceintureplastique ABS
Tension secteurBloc secteur, 100 V - 120 V / 60 Hz, 220 V - 240 V AC / 50 Hz
Batteries rechargeables12 V / 5 Ah
Matériau coffretPolypropylène
Finition coffretBass Reflex
Largeur415 mm
Hauteur (mm)525 mm
Profondeur328 mm
Poids16,5 kg
Autres propriétésEmbase pour pied, diamètre 36 mm, Infrarouge pour lecteur de médias, poignée de transport, Poignée télescopique, Roulettes de transport
Présentation
Mode d'emploi ROADBUDDY 10 HBH 2
La newsletter
La newsletter  Inscrivez vous pour recevoir notre actualité et nos bons plans